氮化硅陶瓷平板振动模态参数的研究

本文采用压电陶瓷片测振技术,试验分析了氮化硅陶瓷平板的固有频率及模态阻尼比,试验结果与有限元计算结果比较吻合。本文还对氮化硅陶瓷平板与普通钢平板做了对比试验,结果表明氮化硅陶瓷平板的固有频率及模态阻尼比都较高。     

ON THE METHOD OF ORTHOGONALITY CONDITIONS FOR SOLVING THE PROBLEM OF LARGE DEFLECTION OF CIRCULAR PLATE

In this paper,we reexamine the method of successive approximation presented byProf.Chien Wei-zang for solving the problem of large deflection of a circular plate,and findthat the method could be regarded as the method of strained parameters in the singularperturbation theory.In terms of the parameter representing the ratio of the centerdeflection to the thickness of the plate,we make the asymptotic expansions of thedeflection,membrane stress and the parameter of load as in Ref.[1],and then give theorthogonality conditions(i.e.the solvability conditions)for the resulting equations,bywhich the stiffness characteristics of the plate could be determined.It is pointed out thatwith the solutions for the small deflection problem of the circular plate and theorthogonality conditions,we can derive the third order approximate relations between theparameter of load and the center deflection and the first-term approximation of membranestresses at the center and edge of the plate without solving the differential equ     

Dynamic theory for smectic A liquid crystals

A dynamic continuum theory is presented for smectic A liquid crystals in which the usual director n and unit layer normal a do not always necessarily coincide. Most previous dynamic continuum theories equate n with a; the theory developed in this article allows n and a to differ in non-equilibrium situations, work that has been motivated by the recent investigations by Auernhammer et al. (Rheol. Acta 39, 215–222, 2000; Phys. Rev. E 66, 061707, 2002) and Soddemann et al. (Eur. Phys. J. E 13, 141–151, 2004). The usual Oseen constraint () for smectics is not imposed upon the unit normal a. Permeation is also included. After a summary of the complete dynamic equations, an application is given via an example which shows that planar aligned layers of smectic A subjected to an arbitrary periodic disturbance are linearly stable.      

Identification of viscoelastic properties by means of nanoindentation taking the real tip geometry into account

Motivated by recent progress in viscoelastic indentation analysis, the identification of viscoelastic properties from nanoindentation test data taking the real tip geometry into account is presented in this paper. Based on the elastic solution of the indentation problem, the corresponding viscoelastic solution is obtained by the application of the method of functional equations. This general solution, which accounts for the real geometric properties of the indenter tip, is specialized for the case of a trapezoidal load history, commonly employed in nanoindentation testing. Three deviatoric creep models, the single dash-pot, the Maxwell, and the three-parameter model are considered. The so-obtained expressions allow us to determine viscoelastic model parameters via back calculation from the measured load–penetration history. The presented approach is illustrated by the identification of short-term viscoelastic properties of bitumen. Hereby, the influence of loading rate, maximum load, and temperature on the model parameters is investigated.     

On stability of stationary motion of a nonconservative nonholonomic rheonomic system

One considers, in this paper, the motion of a mechanical system in a nonstationary field of potential and positional forces, subject to the action of rheonomic holonomic and nonholonomic linear homogeneous constraints. Assuming that differential equations of motion of the system considered satisfy the conditions for the existence of Painlevé's integral of energy, formulated in [Painlevé, P., 1897. Leçons sur l'intégration des équations de la Mécanique, Paris] and [Appell, P., 1911. Traité de mécanique rationnelle, T. II, Dynamique des systémes – Mécanique analitique, Gauthier-Villars, Paris] and generalized in [Čović, V., Vesković, M., 2004. On stability of motion of a rheonomic system in the field of potential and positional forces, BAMM-1720/2004, No-2233, 93–100] and [Čović, V., Vesković, M., 2005. Hagedorn's theorem in some special cases of rheonomic systems. Mechanics Research Communications 32 (3), 265–280], the original mechanical system is substituted by an equivalent one whose Lagrangian function, nontransformed with respect to nonholonomic constraints, does not depend on time explicitly. Using the properties of the equivalent system, which, in contrast to the original one, moves in a stationary field of potential forces and in a nonstationary field of gyroscopic forces, the definition of cyclic coordinates is generalized, as well as sufficient conditions for the existence of (cyclic) first integrals, corresponding to coordinates mentioned and linear in velocities are established. Further, the conditions for the existence of steady motion of the system considered are found. In the case of existence of such a motion of the system, the Theorem of Routh's type on stability of that motion, based on the minimum of reduced potential for which it is shown that, in contrast to known cases (see, for example, [Gantmacher, F., 1975. Lectures in Analytical Mechanics. Mir Publisher, Moscow; Neimark, J., Fufaev, N., 1972. Dynamics of Nonholonomic Systems. Amer. Math. Soc., Providence, RI; Pars, L., 1962. An Introduction to Calculus of Variations. Heinemann, London; Karapetyan, A., Rumyantsev, V., 1983. Stability of conservative and dissipative systems. In: Itogi Nauki I Tekhniki: Obschaya Mekh., vol. 6, VINITI, Moscow, pp. 3–128 (in Russian)]), it includes the influence of the positional forces field, is formulated. Thus, the Routh's Theorem on stability of steady motion of a conservative mechanical system is extended to the case of a nonconservative system.     

Non-linear vibrations and frequency response analysis of piezoelectrically driven microcantilevers

Microcantilevers have recently received widespread attentions due to their extreme applicability and versatility in both biological and non-biological applications. Along this line, this paper undertakes the non-linear vibrations of a piezoelectrically driven microcantilever beam as a common configuration in many scanning probe microscopy and nanomechanical cantilever biosensor systems. A part of the microcantilever beam surface is covered by a piezoelectric layer (typically ZnO), which acts both as an actuator and sensor. The bending vibrations of the microcantilever beam are studied considering the inextensibility condition and the coupling between electrical and mechanical properties in the piezoelectric materials. The non-linear terms appear in the form of quadratic expression due to presence of piezoelectric layer, and cubic form due to geometrical non-linearities. The Galerkin approximation is then utilized to discretize the equations of motion. In addition, the method of multiple scales is applied to arrive at the closed form solution for the fundamental natural frequency of the system. An experimental setup consisting of a commercial piezoelectric microcantilever attached on the stand of a state-of-the-art microsystem analyzer for non-contact vibration measurement is utilized to verify the theoretical developments. It is found that the experimental results and theoretical findings are in good agreement, which demonstrates that the non-linear modeling framework could provide a better dynamic representation of the microcantilever than the previous linear models. Due to microscale nature of the system, excitation amplitude plays an important role since even a small change in the amplitude of excitation can lead to significant vibrations and frequency shift.     

考虑竖向地震作用的振动控制及其优化研究

目前,MRD结构的分析通常只考虑水平地震动而不考虑竖向地震动的影响,地面的水平运动和竖向运动具有相关性,从而影响控制效果．因此对双向地震耦合作用下MRD结构的理论进行研究,建立动力分析模型并得出运动微分方程．以8层MRD结构为例进行地震反应分析,研究表明,考虑和不考虑竖向地震作用,MRD对结构均有良好的控制作用,但是竖向地震作用的存在,使结构各层的层间位移峰值有不同程度的增加,其增量随着竖向地震作用的增加而增加,因此建议在高烈度地区的建筑物考虑竖向地震作用对结构的影响．建立MRD结构优化设计模型,采用IHGA程序对结构进行优化设计．结果表明, MRD结构在各种工况下的各项地震反应均得到更好的控制．     

Gyromat 2000陀螺经纬仪强制对中装置的研制

Gyromat2000陀螺经纬仪是目前自动化程度和精度最高的电子陀螺经纬仪，为了保证其在强制对中方位边上高精度的测量，必须对仪器的强制对中装置进行研制，该文结合作者实践过程，对该装置的研制和测试工作进行阐述。     

MAXIMAL ELEMENTS OF A FAMILY OF GB-MAJORIZED MAPPINGS IN PRODUCT FC-SPACES AND APPLICATIONS

A new family of GB-majorized mappings from a topological space into a finite continuous topological spaces （in short, FC-space） involving a better admissible set-valued mapping is introduced. Some existence theorems of maximal elements for the family of GB-majorized mappings are proved under noncompact setting of product FCspaces. Some applications to fixed point and system of minimax inequalities are given in product FC-spaces. These theorems improve, unify and generalize many important results in recent literature.     

Experimental Study of the Rate of Unsteady Fluid Flow from a Prefilled Vessel

The variation of the flow-rate of a fluid flowing out of a prefilled cylindrical vessel through sinkholes with a diameter less than 0.1 of the vessel diameter has been studied experimentally. The study was carried out in both the presence and the absence of a vortex funnel around the sinkhole. In these experiments the vessel was filled in such a way that a funnel was formed only when a disk immersed in the fluid was rotated before the sinkhole was opened. The time dependence of the flow-rate is found for various initial heights and rates of artificial swirl. Four different outflow stages were detected. It is shown that for certain flow parameters there is a time interval on which the fluid flow-rate is independent of the column height. A critical rotation velocity W _0* below which (W ₀ < W _0*) an intense funnel is not formed is found. A limiting curve approached by all the flow-rate curves in the final stage of outflow is obtained.__________Translated from Izvestiya Rossiiskoi Academii Nauk, Mekhanika Zhidkosti i Gaza, No. 2, 2005, pp. 113–121.Original Russian Text Copyright © 2005 by Shtarev.